Code : P1690
Make : HYUNDAI
Description : P1690 HYUNDAI Immobilizer SMARTRA No Response
Possible causes :
– No response from SMARTRA
– Antenna coil error
– Communication line error (Open/Short etc.)
– Invalid message from SMARTRA to Engine Control Module (ECM)
Solutions :
– Carry out a Reset via CarDiag
– Choose a better quality fuel
– Check that the tank cap is securely closed
– Check the oil level and add more if it is lower than MAX
– Restart an Automatic diagnostic via CarDiag
– If the fault persists, you can check the “Possible causes” listed above : visually inspect (by yourself (tutorials to come) or by a professional) the wiring harness and the associated connectors, check for damaged components, and look for broken, bent, pushed, or corroded connector pins.
Hello,
This is Khaled from Libya, I’m an automotive keys programmer located in Libya and am facing a trouble with Hyundai i30 2008, under a DTC P1676 , can you tell me what’s the solution for this trouble?
Shall I replace the smartra unit (95420-2l700) with newer one or what must I do, please?
Waiting for your quick reply please.
Regards.
Khaled,