Code : P13B4
Make : BMW
Description : P13B4 BMW Crankshaft Inlet Camshaft Reference Angle Difference Outside Limit Value
Possible causes :
– Faulty Crankshaft / Inlet Camshaft Position Sensor
– Crankshaft / Inlet Camshaft Position Sensor harness is open or shorted
– Crankshaft / Inlet Camshaft Position Sensor circuit poor electrical connection
Solutions :
– Carry out a Reset via CarDiag
– Choose a better quality fuel
– Check that the tank cap is securely closed
– Check the oil level and add more if it is lower than MAX
– Restart an Automatic diagnostic via CarDiag
– If the fault persists, you can check the “Possible causes” listed above : visually inspect (by yourself (tutorials to come) or by a professional) the wiring harness and the associated connectors, check for damaged components, and look for broken, bent, pushed, or corroded connector pins.
i was changing the oil cooler gasket i starts the ignition forgeting to put back the oil cooler,it took out the oil approcimetly 3l . can it be the reason why it doesnt want to turn the engine