Code : P2402
Make : 2005_TOYOTA_PRIUS
Description : P2402 2005 TOYOTA PRIUS EVAP System Leak Detection Pump Control Circuit High
Possible causes :
– Faulty Vacuum Pump Module
– Vacuum Pump Module harness is open or shorted
– Vacuum Pump Module circuit poor electrical connection
– EVAP system hose (clogged, cracked or broken)
– Faulty Engine Control Module (ECM)
Solutions :
– Carry out a Reset via CarDiag
– Choose a better quality fuel
– Check that the tank cap is securely closed
– Check the oil level and add more if it is lower than MAX
– Restart an Automatic diagnostic via CarDiag
– If the fault persists, you can check the “Possible causes” listed above : visually inspect (by yourself (tutorials to come) or by a professional) the wiring harness and the associated connectors, check for damaged components, and look for broken, bent, pushed, or corroded connector pins.