Car Diagnostic

* Issue : Faulty Parking Brake Switch* Description : The brake switch may cause the warning light to come on if it is damaged or stuck.* Solution : Parking Brake Adjustment

* Issue : Low Coolant Level* Description : It is important to regularly maintain the cooling system to prolong the life of the radiator.* Solution : Cooling System Flush & Fill * Issue : Faulty Engine Cooling Fan* Description : The engine cooling fan is responsible for moving air across the radiator. This process keeps

* Issue : ABS System Fault* Description : If there is a fault in the ABS system, the vehicle will still brake, however there may be a loss of power-assist. This situation is very unsafe, and the faulty ABS system should be repaired immediately.* Solution : Brake Inspection

* Issue : Check Engine Light On (EGR Valve)* Description : Check Engine Light on with code P0382 or P0400 through P0408 means there is an issue with your vehicle’s exhaust gas recirculation flow.* Solution : Dashboard Warning Diagnostic

* Issue : Worn Front Brakes* Description : When the brake pad lining wears away and the metal backing contacts the brake disc, brakes will make a grinding noise.* Solution : Front Disc Brake Repair * Issue : Worn Rear Brakes* Description : When the brake lining wears, the metal brake shoe or rivets become

* Issue : Brake Pad Wear Indicator is Touching Rotor* Description : The brake pad wear indicator has a metal tab and is attached to the brake pad. When this metal tab touches the rotor, the friction material wears away, and it may cause a squealing sound. * Solution : Brake Inspection * Issue :

* Issue : Contaminated Brake Linings* Description : When brake linings are contaminated with oil, grease, or brake fluid, braking will be uneven. The source of the leak should be properly identified, and pads and shoes will likely need replacement.* Solution : Brake Inspection * Issue : Incorrect Tire Pressure* Description : Tire pressure plays

* Issue : Brake Booster Problem* Description : A damaged diaphragm is a common reason for brake booster failure.* Solution : Brake Inspection * Issue : Leak in Vacuum* Description : The vacuum plays an important role in drawing air into your vehicle’s cylinders, as well as assisting in cruise control components and the emissions

* Issue : Air in Brake Hydraulic System* Description : Air may become trapped in the brake system through moisture that is absorbed by brake fluid, during a component failure, or during a service procedure. If too much air is trapped in the brake system, complete brake failure may occur.* Solution : Brake Inspection *

* Issue : Warped Brake Rotors* Description : Excessive heat or improper wheel lug nut torque may cause brake rotors to warp. Do you feel pulsation or vibration in the brake pedal ? It is necessary to check the rotors to ensure they are parallel, which means no variation in thickness. If the brake rotors